Decorative mineral aggregate coating system for walls and floors — slip-resistant, textured surfaces for residential interiors, commercial lobbies and hospitality spaces. Wall applications suit full exterior exposure; floors are specified for interior or covered areas.
TechStone Mineral Sand introduces material warmth, tactile quality, and considered surface character to both the wall and floor planes — a design element in its own right, not merely a practical substrate. Available in multiple aggregate grades and colour blends, the system ranges from fine, near-monolithic surface expressions to bold, coarse-grain compositions with pronounced aggregate visibility and texture. On vertical surfaces it is specified for interior walls and for fully weather-exposed exterior walls, benches and architectural facades. Slip-resistant by the inherent nature of its aggregate surface, it suits residential entry halls, commercial lobbies and hospitality circulation spaces on the floor plane — specified for interior or covered areas rather than open, weather-exposed ground. Colour, aggregate scale, and joint layout can be coordinated with adjacent wall finishes and lighting to produce a spatially cohesive result.
System Highlights
Sand aggregate texture with natural stone finish
Highly durable 10-15 year lifespan
Self-cleaning surface properties
Water repellent and waterproof
High crack resistance and flexibility
UV resistant - prevents fading
Mildew resistant
Low VOC and low formaldehyde
Suitable for walls, floors, and benches
Interior and exterior application
Slip-resistant option available
Eco-friendly water-based formula
System Specifications
| CSI Section | 09 96 00 -- High-Performance Coatings |
| CSI Number | 09 96 08 |
| Product Type | Silicone acrylic emulsion with ceramic aggregate / sand |
| Application Areas | Interior / exterior walls, floors, benches, architectural facades |
| System Build | Primer -> Main Coat (2 layers) -> Top Coat + Hardener (2-3 coats) |
| Main Coat Thickness | 3 - 5 mm total (2 main coat layers at 1.5 - 2.0 mm each) |
| Coverage Rate | 2.5 kg/m² per coat (5.0 kg/m² over the 2 main coat layers). Estimated at the conservative end of the supplier range. |
| Density | 1.7 - 1.8 g/cm³ |
| VOC Content | Low VOC |
| Formaldehyde | Low formaldehyde |
| Curing Temperature | 5°C - 35°C |
| Surface Dry Time | 4 hours (primer), 12-24 hours (main coat), 3-4 hours (top coat), Full cure 2 days (Hardener) |
| Full Cure | 7 days at 25°C |
| Top Coat Mix Ratio | 5 kg Top Coat + 1 kg Hardener (use within 1-2 hours) |
| Wear Resistance | 5/5 Excellent |
| UV Resistance | 5/5 Excellent |
| Anti-Cracking | 5/5 Excellent |
| Fading Resistance | 5/5 Excellent |
| Sand Texture Fidelity | 5/5 Excellent |
| Waterproof | 4/5 High |
| Self-Cleaning | 4/5 High |
| Scratch Resistance | 4/5 High |
| Mildew Resistance | 4/5 High |
| Expected Lifespan | 10 - 15 years |
| Packaging | 5 kg and 20 kg buckets |
| Storage Temperature | 1°C - 35°C (ventilated, dry, away from sunlight) |
| Substrate Requirements | Solid, flat, dry, clean cement/putty surface. pH < 10, moisture < 8% |
| Humidity Limit | < 85% relative humidity during application |
| Warranty | 1-2 year manufacturer guarantee |
| GHS Classification | Not classified as hazardous |
| Traffic Rating | Residential to light commercial |
| Slip Resistance | Standard and slip-resistant options |
| Finish Character | Sand aggregate - natural tactile surface texture |
| Application Method | Trowel (main coat), roller/spray (primer, top coat) |
Gallery
Common Questions
Is Mineral Sand Flooring slip resistant? +
Yes. TechStone Mineral Sand Flooring is available in standard and slip-resistant options.
What is Mineral Sand Flooring suitable for? +
Mineral Sand Flooring is designed for residential and light commercial interior concrete floors.
How is Mineral Sand Flooring applied? +
Mineral Sand Flooring is applied by roller, squeegee or trowel over a primed concrete floor.
Does Mineral Sand Flooring have grout lines? +
No. Mineral Sand Flooring is a seamless surface system with no grout lines.
How long does Mineral Sand Flooring take to cure? +
Mineral Sand Flooring reaches full cure in 7 days under standard conditions.
At a Glance
| CSI Section | 09 96 00 -- High-Performance Coatings |
| CSI Number | 09 96 08 |
| Product Type | Silicone acrylic emulsion with ceramic aggregate / sand |
| Application Areas | Interior / exterior walls, floors, benches, architectural facades |
Available Colours
Documents
4 documents available for this system.
Want to specify this system?
Specify TechStone
Try Before You Specify
Request a physical colour sample delivered to your office or project site.
Request a Sample
✓
Sample request sent!
We'll be in touch within 1 business day.
Site Visit
Schedule a consultation or on-site demonstration with our technical team.
Book a Site Visit / Appointment
✓
Appointment request sent!
We'll be in touch within 1 business day.
