Seamless trowel-applied microcement coating system for interior walls, floors, and exterior vertical surfaces — the contemporary specification alternative to tile, stone, and polished concrete.
TechStone Microcement is the specification choice of architects, interior designers, and developers who demand surface continuity without interruption. A three-part polymer-modified cementitious system — emulsion base, hardener, and protective topcoat — applied in thin, controlled layers by skilled trowel technicians to produce a grout-free, monolithic surface. The result flows unbroken across walls, floors, staircases, and wet areas: continuous planes of refined material that tile grout lines and concrete joints cannot achieve. Equally at home in minimalist residential interiors, high-traffic commercial environments, and five-star hospitality projects, Microcement transforms ordinary architecture into considered spatial experience. Available in custom-matched colours for precise tonal alignment with any project palette.
System Highlights
Seamless monolithic finish
High wear and scratch resistance
Highly elastic anti-cracking
18+ standard colour options
Wall and floor compatible
Water repellent with top coat system
15+ year lifespan
Interior and exterior application
Low VOC and low formaldehyde
Premium matte aesthetic
Cement-based eco-friendly formula
Easy maintenance
System Specifications
| CSI Section | 09 24 00 -- Cement Plastering |
| CSI Number | 09 24 16 |
| Product Type | Two-component decorative cement coating system |
| Base Composition | Cement-based, inorganic ecological product |
| Application Areas | Interior / exterior walls and floors, decorative architectural finishing |
| Wall System | Primer -> Fine Sand (2 coats) -> Top Coat (2 coats) |
| Floor System | Primer -> Mesh -> Coarse Sand (2) -> Fine Sand (2) -> Seal -> Top Coat (2) |
| Film Thickness (Fine Sand) | 1 - 1.5 mm per coat (2 - 3 mm per sand system, 2 coats) |
| Film Thickness (Coarse Sand) | 1 - 1.5 mm per coat (2 - 3 mm per sand system, 2 coats) |
| Fine Sand Coverage | 1.11-1.3 kg/m2 per coat (2.2-2.6 kg/m2 over 2 coats) |
| Coarse Sand Coverage | 1.5-1.8 kg/m2 per coat (3.0-3.6 kg/m2 over 2 coats) |
| Primer Coverage | 0.144 kg/m² (18 kg bucket covers 120-130 m² per layer) |
| Mixing Ratio | Powder:Emulsion = 4:1 by weight (fine 10:4, coarse 16:4) |
| Density | 1.4-1.5 g/cm3 |
| VOC Content | Low VOC |
| Formaldehyde | Low |
| Curing Temperature | 5-40 C |
| Fine Sand Dry Time | Touch 8-12 hrs, Hard 12-24 hrs |
| Coarse Sand Dry Time | Touch 8-12 hrs, Hard 12-24 hrs |
| Wall Top Coat Dry Time | Touch 2-3 hrs, Hard 4-6 hrs |
| Floor Top Coat Dry Time | Touch 4-6 hrs, Hard 6-10 hrs, Full Curing 2 days |
| Colour Options | 18+ standard colours available |
| Wear Resistance | 5/5 Excellent |
| Anti-Cracking | 5/5 Excellent |
| Aesthetic Versatility | 5/5 Excellent |
| UV Resistance | 4/5 High |
| Waterproof | 4/5 High (with top coat) |
| Acid Resistance | 4/5 High |
| Scratch Resistance | 4/5 High |
| Self-Cleaning | 3/5 Moderate |
| Packaging | 20L bucket (16kg powder + 4kg emulsion) / 6L bucket (4kg + 1kg) |
| Storage Temperature | 5-35 C (cool, dry, avoid freezing) |
| Substrate Requirements | Cement/putty, cured 28+ days, moisture < 10%, pH < 10 |
| Warranty | 1-2 year manufacturer guarantee |
| GHS Classification | Not classified as hazardous |
| Finish Character | Seamless contemporary cement - premium matte |
| Application Method | Trowel/spray (sand layers), roller (primer, top coat) |
Gallery
Common Questions
Can Microcement be used in wet areas? +
Yes. TechStone Microcement is suitable for bathrooms, kitchens and laundries when sealed with Topcoat C, which creates a continuous waterproof surface on walls and floors.
Can Microcement be applied over existing tiles? +
Yes. Microcement applies directly over existing tiles, concrete, cement board and plywood when properly primed, eliminating the need for tile removal.
How thick is a Microcement application? +
A standard Microcement system is 2-3 mm total thickness, comprising two body coats (A and B) at a combined coverage of 2-3 kg/m2, plus primer and seal coat.
Is Microcement suitable for floor traffic? +
Microcement is rated for light to moderate foot traffic and is widely used for residential floors, bathroom walls and hospitality interiors.
How long between Microcement coats? +
Microcement requires 24 hours between coats and achieves full cure in 7 days.
At a Glance
| CSI Section | 09 24 00 -- Cement Plastering |
| CSI Number | 09 24 16 |
| Product Type | Two-component decorative cement coating system |
| Base Composition | Cement-based, inorganic ecological product |
Available Colours
Documents
4 documents available for this system.
Want to specify this system?
Specify TechStone
Try Before You Specify
Request a physical colour sample delivered to your office or project site.
Request a Sample
✓
Sample request sent!
We'll be in touch within 1 business day.
Site Visit
Schedule a consultation or on-site demonstration with our technical team.
Book a Site Visit / Appointment
✓
Appointment request sent!
We'll be in touch within 1 business day.
